Pyramid™ II2150

About
Pyramid™ II2150 is a Polyether Imide (PEI) product filled with 30% glass fiber. It is available in North America. Primary characteristic: flame rated.&&

Product Description
Generic	Polyetherimide
Material Status	Commercial: Negative
Features	V-0
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.51	g/cm³	ASTM D792
Water absorption rate
24hr	0.18	%	ASTM D570

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
3.2mm	53	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	210	℃	ASTM D648
Thermal conductivity coefficient	0.032	W/m/K	ASTM C177

Electrical performance	Nominal value	Unit	Test method
Dielectric strength	30	kV/mm	ASTM D149

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	V-0		UL 94

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
M-level	114		ASTM D785
Tensile modulus	5520	MPa	ASTM D638
tensile strength
fracture	120	MPa	ASTM D638
Tensile strain
fracture	3.0	%	ASTM D638
Bending modulus	5850	MPa	ASTM D790
bending strength
yield	186	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.