| About |
|---|
| Intene ® 50 A is a solution polymerized low cis polybutadienes produced using an alkyl lithium catalyst at the Grangemouth production facility in Scotland, UK. A TNPP free, food contact approved, non-staining antioxidant is added during the production process. Low cis BR is the polybutadiene of choice to produce high impact Polystyrene (HIPS). The solution viscosity typical value of 170 cP is preferred by most users. Main Applications Impact improver to be used in polystyrene and ABS manufacuring. |
| Product Description | |
|---|---|
| Generic | 硅橡胶 |
| Material Status | Commercial: Active |
| Features | High impact resistance,Food contact compliance,Inoxidizability |
| Availabilitys | North America,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| 1,4 cis content | 38.0 | wt% | Internal Method |
| Gel Rating | < 5 | Internal Method | |
| Ash Content | < 0.1 | % | ASTM D5667 |
| Volatiles | < 0.75 | wt% | ASTM D5668 |
| Solution viscosity -5% wt/wt in Styrene (25 ° C) | 170 | mPa·s | Internal Method |
| colour | 5.0 | Internal Method | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |