ENGAGE™ 11527

About
ENGAGE™ 11527 is a polyolefin elastomer offering very high flow and excellent rubber loading efficiency as impact modifier in thermoplastic polyolefin (TPO) compounds. Its improved toughening efficiency compared to other commercially available polyolefin elastomers allows for greater ease in optimizing elastomer levels to meet impact resistance requirements in global automotive specifications. TPO formulations containing ENGAGE 11527 combine excellent processing behavior with very good stiffness/toughness balance for automotive parts, such as bumper fascia. The design of ENGAGE 11527 polyolefin elastomer enables shortening the injection molding cycle time for the TPO compound. Its design characteristics contribute to morphology control and improved temperature resistance for final parts. Main Characteristics: High rubber loading efficiency for optimum cost/performance balance Improved toughness for better stiffness/toughness balance Excellent flow characteristics Demonstrated improved cycle time High melting point for improved temperature resistance Pellet form with partitioning agent for ease of handling Applications: Impact Modification of TPO Injection molded polyolefin compounds&&

About

ENGAGE™ 11527 is a polyolefin elastomer offering very high flow and excellent rubber loading efficiency as impact modifier in thermoplastic polyolefin (TPO) compounds. Its improved toughening efficiency compared to other commercially available polyolefin elastomers allows for greater ease in optimizing elastomer levels to meet impact resistance requirements in global automotive specifications. TPO formulations containing ENGAGE 11527 combine excellent processing behavior with very good stiffness/toughness balance for automotive parts, such as bumper fascia. The design of ENGAGE 11527 polyolefin elastomer enables shortening the injection molding cycle time for the TPO compound. Its design characteristics contribute to morphology control and improved temperature resistance for final parts. Main Characteristics: High rubber loading efficiency for optimum cost/performance balance Improved toughness for better stiffness/toughness balance Excellent flow characteristics Demonstrated improved cycle time High melting point for improved temperature resistance Pellet form with partitioning agent for ease of handling Applications: Impact Modification of TPO Injection molded polyolefin compounds&&

Product Description
Supplier	DOW
Generic	PO增强
Material Status	Commercial: Active
Availabilitys	North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.866	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	15	g/10min	ASTM D1238

THERMAL	Nominal value	Unit	Test method
Glass transition temperature	-62.0	℃	Internal Method
Melting temperature
DSC	118	℃	Internal Method

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shore A, 1 second, molded	55		ASTM D2240
Tensile modulus
100% cut, molded	1.30	MPa	ASTM D638
tensile strength
Fracture, molded	1.20	MPa	ASTM D638
Tensile strain
Fracture, molded	1200	%	ASTM D638

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.