Purell RP373R - SOLIAO

About
Without exception, all potential activities for applications in the pharmaceutical, medical device, laboratory and diagnostics area have to be discussed with the relevant Technical (P & AD) and Business contacts first. To discuss a medical/pharmaceutical application please contact: your local Distributor or your local Basell contact Purell RP373R is a polypropylene random copolymer containing a slip agent. It exhibits a good transparency. Purell RP373R is designed for empty disposable two – part syringes which are not to be supplied in the same package as the medication itself. For regulatory information please refer to Purell RP373R Product Stewardship Bulletin (PSB).&&

About

Without exception, all potential activities for applications in the pharmaceutical, medical device, laboratory and diagnostics area have to be discussed with the relevant Technical (P & AD) and Business contacts first. To discuss a medical/pharmaceutical application please contact: your local Distributor or your local Basell contact Purell RP373R is a polypropylene random copolymer containing a slip agent. It exhibits a good transparency. Purell RP373R is designed for empty disposable two – part syringes which are not to be supplied in the same package as the medication itself. For regulatory information please refer to Purell RP373R Product Stewardship Bulletin (PSB).&&

Product Description
Supplier	LyondellBasell
Generic	PP copolymer
Material Status	Commercial: Active
Features	Smoothness,Optical performance,Random copolymer,Moderate liquidity,High pressure heat resistance,Ethylene oxide disinfection
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ISO 1183
Melt Flow Rate	25	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	64		ISO 868
Tensile modulus	950	MPa	ISO 527-2
tensile strength
yield	27.0	MPa	ISO 527-2
Tensile strain
fracture	> 50	%	ISO 527-2
yield	14	%	ISO 527-2

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength			ISO 179
0℃	1.0	kJ/m²	ISO 179
23℃	5.3	kJ/m²	ISO 179
Charpy Unnotch Impact strength			ISO 179
0℃	56	kJ/m²	ISO 179
23℃	No Break		ISO 179

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	76.0	℃	ASTM D648
0.45 MPa, unannealed	76.0	℃	ISO 75-2/B
Vicat Softening Temp
A50	130	℃	ISO 306/A50
B50	72.0	℃	ISO 306

optical performance	Nominal value	Unit	Test method
Haze
1000 µ m, injection molding	9.0	%	ASTM D1003

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.