POLYSTONE® PVDF FM 4910

About
Product characteristics High temperature resistance Excellent chemical resistance Very good ageing resistance Product applications Clean room and semi conductor industry Chemical engineering and tank building&&

Product Description
GenericPVDF
Material StatusCommercial: Active
FeaturesHigh Heat Resistance,Solvent resistance
AvailabilitysNorth America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICALNominal valueUnitTest method
Density1.78g/cm³ISO 1183
Water absorption rate
Equilibrium, 23 ℃, 50% RH< 0.40%ISO 62

IMPACTNominal valueUnitTest method
Charpy Notched Impact Strength15kJ/m²ISO 179

THERMALNominal valueUnitTest method
Vicat Softening Temp140ISO 306/B
Melting temperature172 to 175ISO 11357-3
Linear coefficient of thermal expansion
MD1.0E-4 to 1.4E-41/℃DIN 53752
specific heat1200J/kg/℃DIN 52612
Thermal conductivity coefficient0.19W/m/KDIN 52612
Operating temperature
long-term0 to 140
short-term< 150

Electrical performanceNominal valueUnitTest method
Surface resistivity< 1.0E+14ohmsIEC 60093
Volume resistivity> 1.0E+14ohms·cmIEC 60093
Dielectric strength20kV/mmIEC 60243-1
Dielectric constant8.00 IEC 60250
Dissipation factor
1 MHz0.020 IEC 60250
Compared to the leakage tracing index600VIEC 60112

FLAME CHARACTERISTICSNominal valueUnitTest method
3.00 mmV-0 UL 94

MECHANICALNominal valueUnitTest method
Shore hardness
Shaw’s D77 ISO 868
Tensile modulus2200MPaISO 527-2
tensile strength
yield55.0MPaISO 527-2
Tensile strain
fracture> 30%ISO 527-2

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.