| About |
|---|
| Aquathene CM04483 is a catalyst masterbatch selected by customers for fast curing moisture cure applications. In addition to catalyst, CM04483 also contains antioxidants and metal deactivator. When melt blended at 5 wt% to Aquathene AQ120000, the resulting material is capable of crosslinking when exposed to moisture.&& |
| Product Description | |
|---|---|
| Supplier | LyondellBasell |
| Generic | 3D打印材料 |
| Material Status | Commercial: Active |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | 16 | g/10min | ASTM D1238 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Drying temperature | 60 | °C | |
| Drying time | 8.0 to 16 | hr | |
| Barrel 1 zone temperature | 135 | °C | |
| Barrel 2 zone temperature | 145 | °C | |
| Barrel 3 zone temperature | 155 | °C | |
| Barrel 4 zone temperature | 160 | °C | |
| Connector temperature | 165 | °C | |
| Nozzle temperature | 170 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 23°C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |