| About |
|---|
| Moplen EP548V is a nucleated heterophasic copolymer with antistatic additivation used for injection moulding applications. It exhibits an outstanding balance of mechanical properties combined with a high fluidity. Moplen EP548V is extensively used in housewares and in thin-walled containers for food packaging (e.g. margerine tubs, yoghurt pots, etc.).&& |
| Product Description | |
|---|---|
| Supplier | LyondellBasell |
| Generic | PP homopolymerization |
| Material Status | Commercial: Active |
| Features | Good Rigidity,High liquidity,Nucleation,Food contact compliance,Solvent resistance,Antistatic property,Impact copolymer |
| Availabilitys | Africa & Middle East ,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.900 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 100 | g/10min | ISO 1133 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -20℃ | 2.0 | kJ/m² | ISO 179/1eA |
| 0℃ | 2.5 | kJ/m² | ISO 179/1eA |
| 23℃ | 3.5 | kJ/m² | ISO 179/1eA |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 90.0 | ℃ | ISO 75-2/B |
| Toughness/brittle transition temperature | -45.0 | ℃ | ISO 6603-2 |
| Vicat Softening Temp | |||
| A50 | 152 | ℃ | ISO 306/A50 |
| B50 | 90.0 | ℃ | ISO 306 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Ball hardness | |||
| H358/30 | 68.0 | MPa | ISO 2039-1 |
| Tensile modulus | 1650 | MPa | ISO 527-2 |
| tensile strength | |||
| yield | 28.0 | MPa | ISO 527-2 |
| Tensile strain | ISO 527-2 | ||
| yield | 5.0 | % | ISO 527-2 |
| fracture | 10 | % | ISO 527-2 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |