| About |
|---|
| Filter-bond is a series of casting and potting compounds ideally suited for medical and food contact applications. This Filter-bond E-SERIES is manufactured to ultra-high quality standards and has been used by customers to pass biocompatibility requirements. FILTER-bond E-3503 and E-3505 exhibit excellent bonding characteristics to various substrates, and are tough products with good physical properties. A few of the most common applications for E-3503 and E-3505 are filtration & ultra-filtration potting and sealing.&& |
| Product Description | |
|---|---|
| Generic | 热固性聚酯 |
| Material Status | Commercial: Active |
| Features | Good flexibility,Food contact compliance,Agglomerability |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.13 | g/cm³ | ASTM D4669 |
| Shrinkage rate | |||
| MD | 0.10 to 0.30 | % | ASTM D2566 |
| Weight（per cubic inch） | 19 | g | |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 无断裂 | ASTM D256 |
| Thermosetting mixed viscosity | Nominal value | Unit | Test method |
|---|---|---|---|
| 25℃ | 43000 to 57000 | cP | ASTM D4878 |
| stripping time | |||
| 60℃ | 120 to 240 | min | |
| Gelation time | |||
| 25℃ | 11.0 to 21.0 | min | ASTM D2971 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 90 | ASTM D2240 | |
| Tensile modulus | 21.4 | MPa | ASTM D638 |
| tensile strength | |||
| yield | 10.3 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 200 | % | ASTM D638 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 50.0 | ℃ | ASTM D648 |
| Thermosetting components | |||
| Component A | 按重量计算的混合比: 100, 按容量计算的混合比: 100 | ||
| Component B | 按重量计算的混合比: 14, 按容量计算的混合比: 17 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. plus 12 hrs @ 21°C |
| 3. 100 g |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |