Cereplast Compostables® 1013

About
Cereplast Sustainables® resins are renewable, ecologically sound substitutes for petroleum-based plastic product, replacing nearly 100% of the petroleum-based additives used in traditional plastics. Cereplast Sustainables® resins are using polymer and additives derived from starch and other renewable resources chemistry. These components are carefully blended together on state-of-the-art compounding equipments. Sustainable 1013 has been designed to have an excellent balance of low stiffness, toughness, and processability. Sustainable 1013 can be processed on existing conventional electric and hydraulic reciprocating screw injection molding machines. Please see our processing guide for processing and material drying guidelines. This can be found at www.cereplast.com.&&

About

Cereplast Sustainables® resins are renewable, ecologically sound substitutes for petroleum-based plastic product, replacing nearly 100% of the petroleum-based additives used in traditional plastics. Cereplast Sustainables® resins are using polymer and additives derived from starch and other renewable resources chemistry. These components are carefully blended together on state-of-the-art compounding equipments. Sustainable 1013 has been designed to have an excellent balance of low stiffness, toughness, and processability. Sustainable 1013 can be processed on existing conventional electric and hydraulic reciprocating screw injection molding machines. Please see our processing guide for processing and material drying guidelines. This can be found at www.cereplast.com.&&

Product Description
Generic	PLA
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Good flexibility,Renewable resources,Biodegradable,Compostable,low-temperature impact resistance
Availabilitys	North America,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.29	g/cm³	ASTM D792-A
Melt Flow Rate
190℃，2.16kg	6.0	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	972	MPa	ASTM D638
tensile strength
fracture	21.0	MPa	ASTM D638
Tensile strain
fracture	350	%	ASTM D638
Bending modulus	703	MPa	ASTM D790
bending strength	18.3	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
-40℃	34	J/m	ASTM D256
23℃	420	J/m	ASTM D256
Drop hammer impact	> 18.1	J	ASTM D5420

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	-35.0	℃	ASTM D746

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.