| About |
|---|
| HIDEN® B500 is a High Density Polyethylene material. It is available in Asia Pacific for blow molding. Important attributes of HIDEN® B500 are: Chemical Resistant Impact Resistant Typical applications include: Containers Food Contact Applications Industrial Applications Medical/Healthcare&& |
| Product Description | |
|---|---|
| Supplier | YUHWA |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | High impact resistance,Good dissection,Solvent resistance |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.958 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.20 | g/10min | ASTM D1238 |
| Shrinkage rate | |||
| MD | 1.5 to 2.5 | % | Internal Method |
| Water absorption rate | |||
| balance | < 0.010 | % | ASTM D570 |
| ESCR(Environmental Stress Cracking Resistance) | 40.0 | hr | ASTM D1693B |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | > 490 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 68.0 | ℃ | ASTM D648 |
| Embrittlement temperature | < -70.0 | ℃ | ASTM D746 |
| Vicat Softening Temp | 122 | ℃ | ASTM D1525 |
| Melting peak temperature | 134 | ℃ | ASTM D3418 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 50 | ASTM D785 | |
| tensile strength | |||
| yield | 30.4 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | > 500 | % | ASTM D638 |
| Bending modulus | 1030 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 10% |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |