TEDUR® L 9116-1

About
TEDUR® L 9116-1 is a Polyphenylene Sulfide (PPS) product filled with 60% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Typical application: Automotive. Characteristics include: Flame Rated RoHS Compliant High Stiffness High Toughness Warp Resistant&&

Product Description
Supplier	ALBIS
Generic	PPS
Material Status	Commercial: Active
Features	Good Rigidity,Low warping,Ultra high toughness
Availabilitys	North America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.90	g/cm³	ISO 1183

MECHANICAL	Nominal value	Unit	Test method
tensile strength
23℃	140	MPa	ISO 527-2
Tensile strain
Fracture, 23 ℃	0.90	%	ISO 527-2
Tensile modulus
23℃	22000	MPa	ISO 527-2
bending strength
23℃	220	MPa	ISO 178
Bending modulus
23℃	20000	MPa	ISO 178

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, annealed	272	℃	ISO 75-2/Af

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level
	0.75mm	V-0	UL 94
	1.50mm	V-0	UL 94
	3.00mm	V-0	UL 94
Relative temperature of heating wire
2.00mm	960	℃	IEC 60695-2-13

IMPACT	Nominal value	Unit	Test method
Charpy Unnotch Impact strength
23℃	25	kJ/m²	ISO 179/1eU
Charpy Notched Impact Strength
23℃	5.00	kJ/m²	ISO 179/1eA
Notched impact strength of cantilever beam
23℃	22	kJ/m²	ISO 180/1U

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	130 -140	°C
Drying time	2-4	Hr
Injection temperature
Rear barrel temperature	320	°C
Central temperature of the barrel	330	°C
Barrel front temperature	340	°C
Mold temperature	>140	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.