| About |
|---|
| MARPOL® EVA 1804 is an Ethylene Vinyl Acetate Copolymer (EVA) product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America.&& |
| Product Description | |
|---|---|
| Generic | EVA |
| Material Status | Commercial: Active |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | 4.5 | g/10min | ASTM D1238 |
| Vinyl acetate content | 18.0 | wt% | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 91 | ASTM D2240 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ASTM D882 | ||
| MD, yield | 41.0 | MPa | ASTM D882 |
| TD, yield | 30.3 | MPa | ASTM D882 |
| MD, fracture | 4.68 | MPa | ASTM D882 |
| TD, fracture | 4.30 | MPa | ASTM D882 |
| Tensile strain | ASTM D882 | ||
| MD, yield | 410 | % | ASTM D882 |
| TD, yield | 560 | % | ASTM D882 |
| MD, fracture | 9.0 | % | ASTM D882 |
| TD, fracture | 9.0 | % | ASTM D882 |
| Drop hammer impact | 610 | g | ASTM D1709 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | < -76.0 | ℃ | ASTM D746 |
| Vicat Softening Temp | 65.0 | ℃ | ASTM D1525 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |