Ultra Purge HIGH-E

About
Very low residual purging compound. Works best with color changes, material changes and shut downs. Cleans out barrels, nozzles, hot runners and heads of extruders from carbon deposits and incrustations. Has expanding agents. Operating Temperature: 374°F – 608°F (190°C – 320°C) Purged Resin: PS PA PC ABS SAN PMMA PBT For Use With: Injection Molding Extruders Hot Runners Blow Molding without accumulators&&

About

Very low residual purging compound. Works best with color changes, material changes and shut downs. Cleans out barrels, nozzles, hot runners and heads of extruders from carbon deposits and incrustations. Has expanding agents. Operating Temperature: 374°F – 608°F (190°C – 320°C) Purged Resin: PS PA PC ABS SAN PMMA PBT For Use With: Injection Molding Extruders Hot Runners Blow Molding without accumulators&&

Product Description
Generic	3D打印材料
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.