Marlex® H516HP

About
This high performance PE 4710 HDPE is tailored for the demanding requirements of pressure pipe applications that require: Excellent long-term hoop strength Superb resistance to slow crack growth Exceptional resistance to rapid crack propagation Outstanding low-temperature toughness Additional information: Meets ASTM D4976 – PE 235 NSF 3rd party D2513 certified NSF CSA B137.1 and B137.4 certified Typical applications for H516HP include: Gas distribution Potable water Industrial When blended with an approved black concentrate, the material meets or exceeds: ASTM D3350, class PE445574C and PE445576C NSF Standards 14 and 61 for potable water PPI designations PE 4710 and PE 100&&

About

This high performance PE 4710 HDPE is tailored for the demanding requirements of pressure pipe applications that require: Excellent long-term hoop strength Superb resistance to slow crack growth Exceptional resistance to rapid crack propagation Outstanding low-temperature toughness Additional information: Meets ASTM D4976 – PE 235 NSF 3rd party D2513 certified NSF CSA B137.1 and B137.4 certified Typical applications for H516HP include: Gas distribution Potable water Industrial When blended with an approved black concentrate, the material meets or exceeds: ASTM D3350, class PE445574C and PE445576C NSF Standards 14 and 61 for potable water PPI designations PE 4710 and PE 100&&

Product Description
Generic	HDPE
Material Status	Commercial: Active
Features	Good Rigidity,Good tear strength,Low temperature toughness
Availabilitys	North America,Latin America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.949	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	9.0	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	25.5	MPa	ASTM D638
Tensile strain
fracture	> 700	%	ASTM D638
Bending modulus
2% secant	965	MPa	ASTM D790
Fundamentals of Hydrostatic Design			ASTM D2837
23℃	11.0	MPa	ASTM D2837
60℃	6.89	MPa	ASTM D2837
Notch Pipe Test（4.6 MPa，80℃）	> 20.8	day	ISO 13479

Supplementary information	Nominal value	Unit	Test method
Minimum Required Strength	10.0	MPa	ISO 9080
Slow crack propagation PENT	> 2000	hr	ASTM F1473
Rapid Crack Propagation（S4 Critical Pressure，0℃）	> 1.20	MPa	ISO 13477

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.