Ecomass® 1002ZC85

About
Ecomass® Compound 1002ZC85. Nontoxic alternative to Lead (Pb), weighting, balancing and radiation shielding applications. Features: Stainless Steel Powder Filled Polyether Block Amide (PEBA), Excellent Toughness.&&

Product Description
Generic	PA Copolymer
Material Status	Commercial: Active
Features	Good flexibility,Ultra high toughness,Copolymer,Nontoxicity
Availabilitys	North America
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	3.75	g/cm³	ISO 1183

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	9.00	MPa	ISO 527-2
Tensile strain
fracture	500	%	ISO 527-2
Bending modulus	200	MPa	ISO 178

Process Conditions
Extrusion	Nominal value	Unit	Test method
Drying temperature	70	°C
Drying time	2.0 to 4.0	hr
Melt temperature	200 to 230	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.