Alathon® L5040TC

About
Alathon L5040TC is a bimodal high density polyethylene copolymer natural resin used by customers for telecommunications conduits. L5040TC offers an excellent balance of stiffness, toughness and ease of processing. Conduits made with this resin are used with fiber optic cable, electrical cable and telecommunications cable. L5040TC meets the material requirements for polyethylene conduit as per ASTM F2160 and also meets the requirements of ASTM D3350 cell classification 435580A.&&

About

Alathon L5040TC is a bimodal high density polyethylene copolymer natural resin used by customers for telecommunications conduits. L5040TC offers an excellent balance of stiffness, toughness and ease of processing. Conduits made with this resin are used with fiber optic cable, electrical cable and telecommunications cable. L5040TC meets the material requirements for polyethylene conduit as per ASTM F2160 and also meets the requirements of ASTM D3350 cell classification 435580A.&&

Product Description
Supplier	LyondellBasell
Generic	HDPE
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Good flexibility,Copolymer
Availabilitys	North America,Latin America,Asia Pacific,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.949	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	0.39	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)			ASTM D1693B
10% non-ionic detergent, F10	> 96.0	hr	ASTM D1693B
100% non-ionic detergent, F50	> 1000	hr	ASTM D1693B

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	63		ASTM D2240
tensile strength
yield	24.8	MPa	ASTM D638
Tensile strain
fracture	> 600	%	ASTM D638
Bending modulus
2% secant	951	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Tensile Impact	100	J/cm	ASTM D1822

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	76.0	℃	ASTM D648
Embrittlement temperature	< -75.0	℃	ASTM D746

Supplementary information	Nominal value	Unit	Test method
Cell Classification	435580A		ASTM D3350

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.