| About |
|---|
| COSMOPLENE FL7013E2 is Polypropylene Homopolymer product with good Aluminum adhesiveness and stiffness/impact balance.&& |
| Product Description | |
|---|---|
| Supplier | TPC |
| Generic | PP homopolymerization |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good surface appearance,Good bond,Homopolymer |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.900 | g/cm³ | ASTM D792 |
| Melt Flow Rate | 7.0 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 44.1 | MPa | ASTM D638 |
| Tensile strain | |||
| yield | 800 | % | ASTM D638 |
| Bending modulus | |||
| 23℃ | 1420 | MPa | ASTM D747 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 30 | µm | |
| Secant modulus | ASTM D882 | ||
| MD | 810 | MPa | ASTM D882 |
| TD | 790 | MPa | ASTM D882 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 165 | ℃ |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | 120 | ASTM D2457 | |
| Haze | 4.6 | % | ASTM D1003 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |