Indothene 1005FY20

About
Indothene 1005FY20 is a Low Density Polyethylene product. It is available in Africa & Middle East, Asia Pacific, or Europe.&&

Product Description
Supplier	Reliance
Generic	LDPE
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.920	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	0.50	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
friction coefficient	0.22		ASTM D1894

film	Nominal value	Unit	Test method
tensile strength			ASTM D882
MD, fracture	21.1	MPa	ASTM D882
TD, fracture	19.6	MPa	ASTM D882
Tensile strain			ASTM D882
MD, fracture	300	%	ASTM D882
TD, fracture	530	%	ASTM D882
Drop hammer impact	150	g	ASTM D1709

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.