| About |
|---|
| RB707CF is a random copolymer Applications RB707CF is recommended for: Transparant packaging film Sealing layer in coextrusion Textile packaging film Food packaging Lamination films Label film Technical and protection film Additives RB707CF does not contain slip or antiblock additives. Special features RB707CF is optimised to deliver: High gloss Low haze Heat sterilisable High stiffness Good sealing performance&& |
| Product Description | |
|---|---|
| Supplier | Borealis AG |
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | Good Clarity,Good surface appearance,Renewable resources,Random copolymer,Heat sterilization,Low temperature heat sealing |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 230℃，2.16kg | 1.5 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Bending modulus | |||
| 23 ℃, injection molding | 900 | MPa | ISO 178 |
| friction coefficient | |||
| With oneself – dynamic | 0.35 | ISO 8295 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 50 | µm | |
| Tensile modulus | |||
| MD, 50 µ m, blow molded film | 950 | MPa | |
| TD, 50 µ m, blow molded film | 900 | MPa | |
| tensile strength | |||
| MD, 50 µ m, blow molded film | 40.0 | MPa | |
| TD, 50 µ m, blow molded film | 30.0 | MPa | |
| Tensile strain | |||
| MD, fracture, 50 µ m, blow molded film | 550 | % | |
| TD, fracture, 50 µ m, blow molded film | 450 | % | |
| Drop hammer impact | |||
| 50 µ m, blow molded film | 50 | g | ISO 7765-1 |
| Dart impact equipped with measuring instruments | |||
| 50 µ m, blow molded film, total energy | 5.00 | J | ISO 7765-2 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 145 | ℃ | ISO 11357-3 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 20 °, 50 µ m, blow molded film | > 60 | ASTM D2457 | |
| Haze | |||
| 50 µ m, blow molded film | < 8.0 | % | ASTM D1003 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |