| About |
|---|
| Product Description | |
|---|---|
| Supplier | DOW |
| Generic | HDPE |
| Material Status | Commercial: Negative |
| Features | low-temperature impact resistance |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.95 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 17 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Yield, MD | 22.8 | MPa | ASTM D638 |
| Yield, TD | 22.8 | MPa | ASTM D638 |
| Fracture, MD | 12.4 | MPa | ASTM D638 |
| Fracture, TD | 12.4 | MPa | ASTM D638 |
| elongation at break | |||
| MD | 300 | % | ASTM D638 |
| TD | 300 | % | ASTM D638 |
| secant modulus | |||
| 2%，MD | 786 | MPa | ASTM D882 |
| 2%，TD | 786 | MPa | ASTM D882 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod notched impact strength | 294 | Kj/m² | ASTM D1822 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |