| About |
|---|
| Globalene® 6560 is a Polypropylene material. It is available in Asia Pacific or North America for injection molding. Primary attribute of Globalene® 6560: Good Dimensional Stability. Typical application of Globalene® 6560: Medical/Healthcare&& |
| Product Description | |
|---|---|
| Supplier | Lee Chang Yung |
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Features | Good Dimensional Stability,Low odor,low-temperature impact resistance,Heat Resistance, Good |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.905 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 11 | g/10min | ASTM D1238 |
| Shrinkage rate | |||
| MD | 1.2 | % | ASTM D955 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 25 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | 130 | ℃ | ASTM D648 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 105 | ASTM D785 | |
| tensile strength | |||
| yield | 37.3 | MPa | ASTM D638 |
| Tensile strain | |||
| yield | 6.0 | % | |
| fracture | 14 | % | |
| Bending modulus | 1960 | MPa | ASTM D790 |
| Process Conditions | |||
|---|---|---|---|
| injection molding | Nominal value | Unit | Test method |
| Melting rate | 10-25 | g/10min | |
| Temperature of the rear section of the barrel | 190-205 | ℃ | |
| Temperature in the middle section of the barrel | 200-220 | ℃ | |
| Temperature of the front section of the material barrel | 205-240 | ℃ | |
| Nozzle temperature | 205-240 | ℃ | |
| Ejection pressure | 4-10 | MPa | |
| Back pressure | 5-15 | Kg/cm² | |
| Screw speed | 60-120 | rpm | |
| Mold temperature | 15-50 | ℃ | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |