Durethan® BC 30 S 000000

About
Durethan® BC 30 S 000000 (干燥 ) PA 6, non-reinforced, injection molding&&Durethan® BC 30 S 000000 PA 6, non-reinforced, injection molding&&

Product Description
Supplier	LANXESS
Generic	PA6
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data

Process Conditions
injection	Nominal value	Unit	Test method
Drying Temperature – Dry Air Dryer	80.0	°C
Drying Time – Dry Air Dryer	2.0 to 6.0	hr
Processing (melt) temperature	260 to 280	°C
Mold temperature	80.0 to 90.0	°C
Residual Moisture Content	0.030 to 0.12	%

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.