| About |
|---|
| 沙特基础工业公司的茂金属聚烯烃塑料等级。是一种乙烯-辛烯共聚物，由Nexlene技术生产。它在广泛的通用和高性能的LLDPE吹膜应用中表现良好，具有良好的加工性能。适用于吹膜挤压加工。 |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | POP |
| Material Status | Commercial: Active |
| Features | Excellent Processability |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.902 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 1.0 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 92 | ASTM D2240 | |
| Shaw’s D | 40 | ASTM D2240 | |
| film thickness | |||
| test | 50 | µm | ASTM D882 |
| Secant modulus | |||
| 1% secant, MD | 68.0 | MPa | ASTM D882 |
| 1% secant, TD | 76.0 | MPa | ASTM D882 |
| tensile strength | |||
| MD, fracture | 47.0 | MPa | ASTM D882 |
| TD, fracture | 42.0 | MPa | ASTM D882 |
| Tensile strain | |||
| MD, fracture | 600 | % | ASTM D882 |
| TD, fracture | 620 | % | ASTM D882 |
| Drop hammer impact | > 1000 | g | ASTM D1709 |
| Elmandorf tear strength | |||
| MD | 10 | g | ASTM D1922 |
| TD | 17 | g | ASTM D1922 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 100 | ℃ | Internal Method |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Haze | 4.0 | % | ASTM D1003 |
| Process Conditions | |||
|---|---|---|---|
| Blown film | Nominal value | Unit | Test method |
| Melt temperature | 180 – 200 | °C | |
| Inflation rate | 2.00 – 3.00 | ||
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |