| About |
|---|
| Product Description | |
|---|---|
| Supplier | Mitsui |
| Generic | PA 6T |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.42 | ||
| Shrinkage rate | |||
| MD | 0.5 | % | |
| TD | 0.8 | % | |
| Water absorption rate | |||
| 2mm,100℃，5hr | 3.6 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 170 | MPa | |
| Tensile strain | 3.0 | % | |
| bending strength | 260 | MPa | |
| 10000 | MPa | ||
| Rockwell hardness | |||
| M-level | 110 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 80 | J/m |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| melting point | 310 | ℃ | |
| Glass transition temperature | 85 | ℃ | |
| Hot deformation temperature | |||
| 1.82MPa | 300 | ℃ |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 1.0E+16 | ohm·cm | |
| Dielectric constant | |||
| 1MHz | 4.5 | ||
| Dissipation factor | |||
| 1MHz | 0.018 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | HB | UL 94 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |