ACRYLITE® Heatresist FT15

About
When high heat resistance and lighting efficiency is desired ACRYLITE® Heatresist acrylic compounds provide the solution. They offer all the advantages of PMMA including weatherability and optics but provide another level of heat resistance. These copolymers are based on methyl methacrylate (MMA) with comonomer constituents. They are ideal for technical parts subjected to high thermal stress. ACRYLITE® Heatresist molding and extrusion compounds are offered in two grades. ACRYLITE® hw55 and ACRYLITE® FT15 offer the following benefits: Excellent weathering characteristics High light transmission High mechanical strength High surface hardness and mar resistance AMECA listed ACRYLITE® Heatresist FT15 offers very high heat resistant characteristics compared to most other grades of ACRYLITE® polymer. Higher melt volume rates than ACRYLITE® Heatresist hw55.&&

About

When high heat resistance and lighting efficiency is desired ACRYLITE® Heatresist acrylic compounds provide the solution. They offer all the advantages of PMMA including weatherability and optics but provide another level of heat resistance. These copolymers are based on methyl methacrylate (MMA) with comonomer constituents. They are ideal for technical parts subjected to high thermal stress. ACRYLITE® Heatresist molding and extrusion compounds are offered in two grades. ACRYLITE® hw55 and ACRYLITE® FT15 offer the following benefits: Excellent weathering characteristics High light transmission High mechanical strength High surface hardness and mar resistance AMECA listed ACRYLITE® Heatresist FT15 offers very high heat resistant characteristics compared to most other grades of ACRYLITE® polymer. Higher melt volume rates than ACRYLITE® Heatresist hw55.&&

Product Description
Supplier	ROHM
Generic	PMMA
Material Status	Commercial: Active
Features	Good Rigidity,Weather resistance is good,Good Clarity,Good Hardness,High Heat Resistance,Moderate liquidity,High scratch resistance,Good coloring,Amorphous,HB
Availabilitys	North America
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.19	g/cm³	ISO 1183
Melt Volume Rate
230℃，3.8 kg	4.50	cm³/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	3500	MPa	ISO 527-1-2
tensile strength
fracture	50.0	MPa	ISO 527-2/5
Tensile strain
fracture	3.1	%	ISO 527-2/5

IMPACT	Nominal value	Unit	Test method
Charpy Unnotch Impact strength
23℃	18	kJ/m²	ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	105	℃	ISO 75-2/A
0.45 MPa, unannealed	107	℃	ISO 75-2/B
Glass transition temperature	121	℃	IEC 1006
Vicat Softening Temp
B50	115	℃	ISO 306

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
1.60 mm	HB		UL 94
Igniting temperature of the hot wire	675	℃	IEC 60695-2-13
Flame retardant level	B2		DIN 4102

optical performance	Nominal value	Unit	Test method
Refractive index	1.502		ISO 489
Transmittance
3000 µm	91.0	%	ISO 13468-2

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.