| About |
|---|
| FRIANYL® A3 GF25 V0 is a Polyamide 66 (Nylon 66) compound, 25% glass fiber reinforced, flame retardant, halogen and red phosphorous free, UL listed V0. It is VDE certified. It is also certified according to railways requirements EN45545-2 and NFF 16-101. This compound is intended for injection molding. FRIANYL® A3 GF25 V0 is primarily designed for the Electrical and Electronic industry. It is also suitable for Automotive or Industrial & Consumer applications.&& |
| Product Description | |
|---|---|
| Supplier | Celanese |
| Generic | PA66 |
| Material Status | Commercial: Active |
| Features | Halogen free,Low to no phosphorus content,Flame Characteristics |
| Availabilitys | Africa & Middle East ,Europe,Asia Pacific,North America,Latin America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Viscosity number | 3600 | in³/lb | ISO 307, 1157, 1628 |
| Molding shrinkage | |||
| parallel | 0.3-0.6 | % | ISO 294-4 |
| normal | 0.6-0.9 | % | ISO 294-4 |
| Moisture Absorption | 1.4 | % | ISO 62 |
| Water Absorption | 4.9 | % | ISO 62 |
| Density | 11 | lb/gal | ISO 1183 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Modulus | |||
| Dry | 9039 | MPa | ISO 527 |
| Wet Cond | 6304.8 | MPa | ISO 527 |
| Tensile Stress | |||
| Broken BRK, dry dry | 130.41 | MPa | ISO 527 |
| Broken BRK, wet Cond | 90.39 | MPa | ISO 527 |
| Tensile Strain | |||
| Broken BRK, dry dry | 3.5 | % | ISO 527 |
| Broken BRK, wet Cond | 6.5 | % | ISO 527 |
| Flexural Modulus | |||
| Dry | 9039 | MPa | ISO 178 |
| Wet Cond | 6003 | MPa | ISO 178 |
| Flexural Strength | |||
| Dry | 204.93 | MPa | ISO 178 |
| Wet Cond | 150.42 | MPa | ISO 178 |
| Ball indentation hardness | 215.28 | MPa | ISO 2039-1 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | |||
| 23 ℃, dry | 59.85 | kJ/m² | ISO 179 |
| 23 ℃, moist cond | >126 | kJ/m² | ISO 179 |
| Charpy Notched Impact Strength | |||
| 23 ℃, dry | 9 | kJ/m² | ISO 179 |
| 23 ℃, moist cond | 12 | kJ/m² | ISO 179 |
| -30 ℃, dry | 7.5 | kJ/m² | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 260 | ℃ | ISO 11357-3 |
| Hot deformation temperature HDT | |||
| 1.80 MPa | 210 | ℃ | ISO 75-1/-2 |
| 0.45 MPa | 235 | ℃ | ISO 75-1/-2 |
| Ball Pressure Test | 175 | ℃ | IEC 60695-10-2 |
| Relative Temperature Index (RTI) | |||
| electrical | |||
| 0.4 mm | 120 | ℃ | UL-746B |
| 0.75 mm | 130 | ℃ | UL-746B |
| 1.5 mm | 130 | ℃ | UL-746B |
| 3.0 mm | 130 | ℃ | UL-746B |
| impact | |||
| 0.75 mm | 90 | ℃ | UL-746B |
| 1.5 mm | 90 | ℃ | UL-746B |
| 3.0 mm | 90 | ℃ | UL-746B |
| strength | |||
| 0.75 mm | 130 | ℃ | UL-746B |
| 1.5 mm | 130 | ℃ | UL-746B |
| 3.0 mm | 130 | ℃ | UL-746B |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame Class Rating | |||
| 0.8 mm | V-0 | calss | UL 94 |
| 0.4 mm | V-0 | calss | UL 94 |
| Glow Wire Flammability Index (GWFI) | |||
| 0.4 mm | 960 | ℃ | IEC 60695-2-12 |
| 3.0 mm | 960 | ℃ | IEC 60695-2-12 |
| Glow Wire Ignitability Temperature (GWIT) | |||
| 0.75 mm | 776 | ℃ | IEC 60695-2-13 |
| 0.4 mm | 748 | ℃ | IEC 60695-2-13 |
| 1.5 mm | 798 | ℃ | IEC 60695-2-13 |
| 3.0 mm | 798 | ℃ | IEC 60695-2-13 |
| FMVSS flame retardant rating | SE | ISO 3795 | |
| Hot wire ignition | |||
| 0.75 mm | PLC 0 | s | UL 746A |
| 1.5 mm | PLC 0 | s | UL 746A |
| 3 mm | PLC 0 | s | UL 746A |
| ELECTRICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume Resistance | >1E13 | ohm·m | IEC 62631-3-1 |
| Surface Resistivity | 1E14 | ohm | IEC 62631-3-2 |
| Electric strength | 1170 | kV/in | IEC 60243-1 |
| Compared Tracking Index | |||
| Group 1 | PLC 0 | PLC Code | UL 746 |
| High Amperage Arc Ignition Resistance | |||
| 0.75 mm | PLC 0 | arcs | UL 746A |
| 1.5 mm | PLC 0 | arcs | UL 746A |
| High Amperage Arc Ignition Category | |||
| 1.5 mm | PLC 0 | UL 746A |
| Process Conditions | |||
|---|---|---|---|
| Injection Molding | Nominal value | Unit | Test method |
| Cylinder temperature | 265-290 | ℃ | |
| Nozzle temperature | 300 | ℃ | |
| Hot runner temperature | 300 | ℃ | |
| Mold Temperature | 60-80 | ℃ | |
| Back Pressure | 5-10 | bar | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 20000 hr |
| 3. 23°C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |