| About |
|---|
| Product Description | |
|---|---|
| Supplier | Guoxin |
| Generic | PETG |
| Material Status | Commercial: Active |
| Features | High Heat Resistance |
| Technical Data | |||
|---|---|---|---|
| Basic information | Nominal value | Unit | Test method |
| Intrinsic viscosity | 0.756 | dl/g | |
| Terminal hydroxyl group | 27.60 | mol/t | |
| melting point | 194.4 | ℃ | |
| Diethylene glycol | 0.98 | % | |
| Moisture | 0.01 | % | |
| Ash content | 0.01 | % | |
| Color value | |||
| L | 64.35 | ||
| b | -0.72 | ||
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| viscosity | 0.750 ± 0.015 | dL/g | 乌式粘度计 |
| Density | 1.27 | kg/m³ | ASTM D792 |
| Water absorption rate | 0.15 | % | ASTM D570 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Yield, 50mm/min | 49.6 | MPa | ASTM D638 |
| Fracture, 50mm/min | 28.1 | MPa | ASTM D638 |
| elongation at break | |||
| Yield, 50mm/min | 3.7 | % | ASTM D638 |
| Fracture, 50mm/min | 136 | % | ASTM D638 |
| bending strength | |||
| 1.27mm/min | 62 | MPa | ASTM D790 |
| Bending modulus | |||
| 1.27mm/min | 2080 | MPa | ASTM D790 |
| Rockwell hardness | 106 | R Scale |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Drop hammer impact | |||
| low temperature | 791 | g | ASTM D358 |
| normal temperature | 1701 | g | ASTM D358 |
| Impact strength of cantilever beam notch | |||
| 23℃ | 98 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45MPa | 68 | ℃ | ASTM D648 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | 1E+16 | ohm | ASTM D257 |
| Volume resistivity | 1E+15 | ohm·cm | ASTM D257 |
| Dielectric strength | 16 | kV/mm | ASTM D149 |
| Dielectric constant | |||
| 1 kHz | 2.6 | ASTM D150 | |
| 1 MHz | 2.4 | ASTM D150 | |
| 1 kHz | 0.005 | ASTM D150 | |
| Dissipation factor | |||
| 1 kHz | 0.005 | ASTM D150 | |
| 1 MHz | 0.023 | ASTM D150 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 1.00mm | HB | UL 94 | |
| 1.50mm | HB | UL 94 | |
| 3.00mm | V-2 | UL 94 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Haze | ＜1.0 | % | |
| Transmittance | 90 | % | ASTM D541 |
| Refractive index | 1.52 | ASTM D542 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |