| About |
|---|
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | Polycarbonate |
| Material Status | Commercial: Negative |
| Features | low-temperature impact resistance,Solvent resistance,Flame Characteristics |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Tensile stress | |||
| Yield 50 mm/min | 52 | MPa | ASTM D638 |
| Fracture 50 mm/min | 59 | MPa | ASTM D638 |
| Yield 50 mm/min | 50 | MPa | ISO 527 |
| Fracture 50 mm/min | 57 | MPa | ISO 527 |
| Tensile strain | |||
| Yield 50 mm/min | 6 | % | ASTM D638 |
| Fracture 50 mm/min | >100 | % | ASTM D638 |
| Yield 50 mm/min | 6 | % | ISO 527 |
| Fracture 50 mm/min | >100 | % | ISO 527 |
| Bending modulus | |||
| 1.3 mm/min, 50 mm span | 2000 | MPa | ASTM D790 |
| 2 mm/min | 2012 | MPa | ISO 178 |
| Tensile modulus | |||
| 1 mm/min | 1858 | MPa | ISO 527 |
| 50mm/min | 1920 | MPa | ASTM D638 |
| bending strength | |||
| 1.3 mm/min, 50 mm span(2) | 85 | MPa | ASTM D790 |
| 2 mm/min(2) | 80 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23°C | 765 | J/m | ASTM D256 |
| -30°C | 680 | J/m | ASTM D256 |
| -60°C | 609 | J/m | ASTM D256 |
| -70°C | 570 | J/m | ASTM D256 |
| 80*10*3 +23°C | 55 | KJ/m² | ISO 180/1A |
| 80*10*3 -70°C | 35 | KJ/m² | ISO 180/1A |
| Notched impact strength of cantilever beam | |||
| 23°C | NB | J/m | ASTM D4812 |
| -70°C | NB | J/m | ASTM D4812 |
| 80*10*3 +23°C | NB | KJ/m² | ISO 180/1U |
| 80*10*3 -70°C | NB | KJ/m² | ISO 180/1U |
| Charpy Notched Impact Strength | |||
| 23°C， 80*10*3 sp=62mm | 65 | kJ/m² | ISO 179/1eA |
| Charpy Unnotch Impact strength | |||
| 23°C，80*10*3 sp=62mm | NB | kJ/m² | ISO 179/1eU |
| -70°C,80*10*3 sp=62mm | NB | kJ/m² | ISO 179/1eU |
| Total energy of instrument impact | |||
| 23°C | 61 | J | ASTM D3763 |
| Instrument impact energy peak | |||
| 23°C | 100 | % | ASTM D3763 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | |||
| Rate B/120 | 144 | ℃ | ISO 306 |
| Rate B/50 | 142 | ℃ | ASTM D1525 |
| Rate B/50 | 142 | ℃ | ISO 306 |
| Rate B/120 | 146 | ℃ | ASTM D1525 |
| Hot deformation temperature | |||
| 1.82MPa, 3.2mm, unannealed | 125 | ℃ | ASTM D648 |
| 0.45 MPa, 3.2 mm, unannealed | 138 | ℃ | ASTM D648 |
| Af,1.8 MPa 80*10*4 sp=64mm | 123 | ℃ | ISO 75/Af |
| Bf, 0.45 MPa 80*10*4 sp=64mm | 137 | ℃ | ISO 75/Af |
| Linear coefficient of thermal expansion | |||
| -40 ° C to 40 ° C, flow | 7E-05 | 1/°C | ASTM E831 |
| -40 ° C to 40 ° C, lateral | 7E-05 | 1/°C | ASTM E831 |
| -40 ° C to 40 ° C, flow | 7E-05 | 1/°C | ISO 11359-2 |
| -40 ° C to 40 ° C, lateral | 7E-05 | 1/°C | ISO 11359-2 |
| Relative temperature index | |||
| Electrical characteristics | 80 | ℃ | UL-746B |
| Mechanical impact performance | 80 | ℃ | UL-746B |
| Non mechanical impact performance | 80 | ℃ | UL-746B |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Mold shrinkage rate | |||
| flow | 0.4 – 0.9 | % | SABIC method |
| Lateral flow | 0.4 – 0.9 | % | SABIC method |
| Melt Flow Rate | |||
| 300°C，1.2 kg | 9 | cm³/10 min | ISO 1133 |
| 300°C，1.2 kg | 9.5 | cm³/10 min | ASTM D1238 |
| proportion | 1.2 | ASTM D792 | |
| Water absorption rate | |||
| 23°C，24hrs | 0.3 | % | ISO 62-1 |
| Hygroscopicity | |||
| 23°C，50% RH，24hrs | 0.08 | % | ISO 62-4 |
| Melt Volume Rate | |||
| 300°C，1.2 kgf | 10 | g/10 min | ASTM D1238 |
| Density | 1.19 | g/cm³ | ISO 1183 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Compared to the leakage tracing index | |||
| (UL) {PLC} | 3 | PLC Code | UL 746A |
| High Arc Burning Index (HAI) | |||
| PLC 0 | ≥0.8 | mm | UL 746A |
| Hot wire ignition (HWI) | |||
| PLC 0 | ≥0.8 | mm | UL 746A |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| ≥1.6 | mm | UL 94 |
| Process Conditions | |||
|---|---|---|---|
| Spray molding method | Nominal value | Unit | Test method |
| drying temperature | 120 | °C | |
| Maximum moisture content | 0.02 | % | |
| Melting temperature | 290 – 340 | °C | |
| Nozzle temperature | 290 – 340 | °C | |
| Front temperature | 290 – 340 | °C | |
| Mid section temperature | 280 – 330 | °C | |
| Post stage temperature | 270 – 320 | °C | |
| Drying time | 3 – 4 | Hrs | |
| Forming temperature | 80 – 110 | °C | |
| Drying time (cumulative) | 12 | Hrs | |
| Back pressure | 0.3 – 0.7 | MPa | |
| Screw speed | 50 – 100 | rpm | |
| Shoot to cylinder size | 40 – 80 | % | |
| Depth of exhaust groove | 0.025 – 0.076 | mm | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |