| About |
|---|
| Product Description | |
|---|---|
| Supplier | Covestro |
| Material Status | Commercial: Negative |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Shore hardness | |||
| Shaw’s A | 71 | ISO 868 | |
| tensile strength | |||
| 100% strain, 200 mm/min | 2.8 | MPa | DIN 53504 |
| 300% strain, 200 mm/min | 5.2 | MPa | DIN 53504 |
| Limit, 200 mm/min | 24.0 | MPa | DIN 53504 |
| Tensile strain | |||
| fracture | 900 | % | DIN 53504 |
| tear strength | |||
| 500 mm/min | 180 | kN/m | ISO 34 |
| Compression deformation | |||
| 70℃，24hr | 51.7 | % | ISO 815 |
| 23℃，72hr | 23.4 | % | ISO 815 |
| abrasion resistance | 180 | mm³ | ISO 4649 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.150 | g/cm³ | ISO 1183 |
| Process Conditions | |||
|---|---|---|---|
| Injection | Nominal value | Unit | Test method |
| Melting temperature | 155 – 175 | ℃ | |
| Mold temperature | 20 – 40 | ℃ | |
| drying temperature | 80 | ℃ | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |