| About |
|---|
| Product Description | |
|---|---|
| Generic | 热固性聚酯 |
| Material Status | Commercial: Negative |
| Features | Good Rigidity,Excellent Processability,Low smoke,Halogen free,Flame Characteristics,High Heat Resistance,HB |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.90 | g/cm³ | ISO 1183 |
| Shrinkage rate | 0.15 | % | ISO 2577 |
| Water absorption rate | |||
| Saturation, 23 ℃ | < 0.7 | % | ISO 62 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| Compression Molding | 12000 | MPa | ISO 527-2 |
| tensile strength | 50 | MPa | ISO 527-2 |
| Bending modulus | |||
| Compression Molding | 9000 | MPa | ISO 178 |
| bending strength | |||
| Compression Molding | 100 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | 40 | kJ/m² | ISO 179 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 3.0 mm | HB | UL 94 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |