| About |
|---|
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | High impact resistance,Moderate liquidity,Heat Stabilized,high-rigidity |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 230℃，2.16kg | 24.5 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Strength | |||
| Yield yld | 24 | MPa | ASTM D638 |
| Broken BRK | 17 | MPa | ASTM D638 |
| Flexural Modulus | 1290 | MPa | ASTM D790 |
| Rockwell hardness | 90 | R Scale | ASTM D-785 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod Notched Impact strength | |||
| 23℃ | 8 | KJ/m² | ISO 180/1A |
| -20℃ | 5 | KJ/m² | ISO 180/1A |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temperature | 151 | ℃ | ASTM D1525 |
| Hot deformation temperature HDT | |||
| 0.45 MPa | 109 | ℃ | ASTM D648 |
| Process Conditions | |||
|---|---|---|---|
| Injection Molding | Nominal value | Unit | Test method |
| Melt Temperature | 190-230 | ℃ | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |