KUBE PIR 22414

About
Transmissive Plastic Injection Molding Granulates For fresnel lenses and windows of PIR motion detectors, thermal imaging cameras and non-contact thermometers Features: The best material for fresnel lenses Specially suited for thin parts High transmission in the 7 to 14 µm central passive infrared (PIR) band Choice of colors and MFI RoHS and TSCA conform Excellent visible light absorption available for low false alarm rate / VDS conformity Special colors available on request According to KUBE’s experience, these materials exhibit no substantial loss of specification over 10 years 22414: Super-White. Long-term stable. The best choice for white lenses. Higher MFI for molding of thin parts.&&

About

Transmissive Plastic Injection Molding Granulates For fresnel lenses and windows of PIR motion detectors, thermal imaging cameras and non-contact thermometers Features: The best material for fresnel lenses Specially suited for thin parts High transmission in the 7 to 14 µm central passive infrared (PIR) band Choice of colors and MFI RoHS and TSCA conform Excellent visible light absorption available for low false alarm rate / VDS conformity Special colors available on request According to KUBE’s experience, these materials exhibit no substantial loss of specification over 10 years 22414: Super-White. Long-term stable. The best choice for white lenses. Higher MFI for molding of thin parts.&&

Product Description
Generic	HDPE
Material Status	Commercial: Active
Features	Flame Characteristics
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.95-0.96	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	29	g/10min	ISO 1133

Process Conditions
Injection Molding	Nominal value	Unit	Test method
Drying Temperature	<70	°C
Drying Time	2	Hr
Rear Temperature Zone 1	170-220	℃
Middle Temperature Zone 2	200-220	℃
Front Temperature Zone 3	210-220	℃
Die temperature	220-230	℃
Mold Temperature	50-70	℃

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.