KUBE PIR 40700

About
Transmissive Plastic Injection Molding Granulates For fresnel lenses and windows of PIR motion detectors, thermal imaging cameras and non-contact thermometers Features: The best material for fresnel lenses Specially suited for thin parts High transmission in the 7 to 14 µm central passive infrared (PIR) band Choice of colors and MFI RoHS and TSCA conform Excellent visible light absorption available for low false alarm rate / VDS conformity Special colors available on request According to KUBE’s experience, these materials exhibit no substantial loss of specification over 10 years 40700: dense black&&

About

Transmissive Plastic Injection Molding Granulates For fresnel lenses and windows of PIR motion detectors, thermal imaging cameras and non-contact thermometers Features: The best material for fresnel lenses Specially suited for thin parts High transmission in the 7 to 14 µm central passive infrared (PIR) band Choice of colors and MFI RoHS and TSCA conform Excellent visible light absorption available for low false alarm rate / VDS conformity Special colors available on request According to KUBE’s experience, these materials exhibit no substantial loss of specification over 10 years 40700: dense black&&

Product Description
Generic	HDPE
Material Status	Commercial: Active
Features	Flame Characteristics,Weather resistance is good
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.951 to 0.960	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	21	g/10min	ISO 1133

Process Conditions
Injection Molding	Nominal value	Unit	Test method
Drying Temperature	< 70	°C
Drying Time	2.0	hr
Hopper Temperature	50 to 70	°C
Rear Temperature Zone 1	170 to 220	°C
Middle Temperature Zone 2	200 to 220	°C
Front Temperature Zone 3	210 to 220	°C
Nozzle temperature	220 to 230	°C
Melt Temperature	130	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.