| About |
|---|
| Product Description | |
|---|---|
| Supplier | NuSil |
| Material Status | Commercial: Active |
| Features | Good tear strength,High molecular weight,Low contractility |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding,Extrusion |
| Technical Data | |||
|---|---|---|---|
| THERMAL | Nominal value | Unit | Test method |
| Thermosetting component | |||
| Component A | 按重量计算的混合比: 1.0 | ||
| Component B | 按重量计算的混合比: 1.0 | ||
| supplement | Nominal value | Unit | Test method |
|---|---|---|---|
| Cure System | Platinum |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.16 | g/cm³ | |
| Curing Time | |||
| 116℃ | 0.17 | hr | |
| STORAGE Stability | |||
| 25 ℃ | 300 | min |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A | 50 | ||
| Tensile Strength | 10.0 | MPa | |
| 200% Strain | 2.07 | MPa | |
| Tensile Strain | |||
| Broken BRK | 1000 | % | |
| Tear strength | 43.8 | kN/m |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |