| About |
|---|
| Product Description | |
|---|---|
| Supplier | CHI MEI |
| Generic | PC+ABS |
| Material Status | Commercial: Active |
| Features | High Heat Resistance,Flame Characteristics |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt index | 26 | g/10min | 1133 |
| Spiral flow | |||
| 260℃,2mm | 24.7 | cm | CHIMEI |
| proportion | 1.19 | g/cm3 | 1183 |
| Forming shrinkage rate | 0.4-0.6 | % | 294-4 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Yield 50 mm/min | 63 | MPa | 527 |
| Fracture 50 mm/min | 62 | MPa | 527 |
| Elongation rate | 107 | % | 527 |
| bending strength | ASTM D790 | ||
| 2 mm/min | 94 | MPa | ISO 178 |
| Bending elastic modulus | |||
| 2 mm/min | 2.4 | GPa | 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 63 | KJ/m² | ISO 180/1A |
| -30℃ | 15 | KJ/m² | ISO 180/1A |
| Charpy Notched Impact Strength | |||
| 23℃ | 60 | kJ/m² | ISO 179 |
| -30℃ | 14 | kJ/m² | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | |||
| 50℃/hr，1KG | 127 | ℃ | 306 |
| 50℃/hr，5KG | 121 | ℃ | 306 |
| Hot deformation temperature | |||
| 1.8MPa, unannealed | 102 | ℃ | 75/A |
| 1.8MPa, annealed | 114 | ℃ | 75/A |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric coefficient | 3.1 | IEC 60250 | |
| Volume resistivity | 3.9E+15 | ohms·cm | IEC 60093 |
| Surface resistivity | 2.9E+15 | ohm | IEC 60093 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Burning level | |||
| 1.2mm | V-0 | UL-94 | |
| 2.5mm | 5VA | UL-94 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |