Zytel® HTN 51G45HSL NC010

About
45% Glass Reinforced, PPA, High Performance Polyamide&&

Product Description
Supplier	Celanese
Material Status	Commercial: Active
Features	HB,Heat Stabilized
Availabilitys	North America,Latin America,Africa & Middle East ,Europe,Asia Pacific
Process Methods	Injection Molding

MECHANICAL	Nominal value	Unit	Test method
Tensile Modulus
Dry	15180	MPa	ISO 527
Wet Cond	15180	MPa	ISO 527
Creep, 1 hour	14007	MPa	ISO 527
Creep, 1000 hours	12006	MPa	ISO 527
Tensile Stress
Broken BRK, dry dry	262.2	MPa	ISO 527
Broken BRK, wet Cond	227.7	MPa	ISO 527
Tensile Strain
Broken BRK, dry dry	2.4	%	ISO 527
Broken BRK, wet Cond	2.1	%	ISO 527
Flexural Modulus
Dry	15042	MPa	ISO 178
Wet Cond	15042	MPa	ISO 178
Flexural Strength
Dry	370.53	MPa	ISO 178
Rockwell hardness
M	109		ISO 2039-2
R	125		ISO 2039-2
Poisson’s ratio
Dry	0.33
Wet Cond	0.33

IMPACT	Nominal value	Unit	Test method
Charpy Unnotch Impact strength
23 ℃, dry	90.3	kJ/m²	ISO 179/1eU
23 ℃, moist cond	75.6	kJ/m²	ISO 179/1eU
-40 ℃, dry	84	kJ/m²	ISO 179/1eU
Charpy Notched Impact Strength
23 ℃, dry	11.97	kJ/m²	ISO 179/1eA
23 ℃, moist cond	10.92	kJ/m²	ISO 179/1eA
-30 ℃, dry	11.97	kJ/m²	ISO 179/1eA
-30 ℃, dry	13.02	kJ/m²	ISO 179/1eA
Izod Notched Impact strength
23 ℃, dry	12	KJ/m²	ISO 180/1A
23 ℃, moist cond	12	KJ/m²	ISO 180/1A
-40 ℃, dry	13	KJ/m²	ISO 180/1A
Izod Unnotched Impact strength of cantilever beam
23 ℃, dry	86.9	KJ/m²	ISO 180/1U

THERMAL	Nominal value	Unit	Test method
Melting temperature	300	℃	ISO 11357-3
Glass Transition Temperature
Dry	135	℃	ISO 11357-2
Wet Cond	95	℃	ISO 11357-2
Hot deformation temperature HDT
1.8 MPa	265.6	℃	ISO 75-1/-2
0.45 MPa	287.8	℃	ISO 75-1/-2
Coeff. of linear thermal expansion
Parallel, -40-23 ℃	0.0833	E-4/°F	ISO 11359-2
Parallel	0.08	E-4/°F	ISO 11359-2
Parallel, 55-160 ℃	0.0722	E-4/°F	ISO 11359-2
Normal, -40-23 ℃	0.278	E-4/°F	ISO 11359-2
Normal	0.3
Thermal conductivity	0.28	W/m/K
Specification of Heat Capacity of Melt	0.605	BTU/(lb·F)
Relative Temperature Index (RTI)
Electrical
0.75 mm	150	℃	UL-746B
1.5 mm	150	℃	UL-746B
3.0 mm	150	℃	UL-746B
Impact
0.75 mm	120	℃	UL-746B
1.5 mm	125	℃	UL-746B
3.0 mm	150	℃	UL-746B
Strength
0.75 mm	130	℃	UL-746B
1.5 mm	140	℃	UL-746B
3.0 mm	150	℃	UL-746B

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame Class Rating
1.6 mm	HB		UL 94
0.8 mm	HB		UL 94
Oxygen Index	24	%	ISO 4589-2
FMVSS flame retardant rating	B		ISO 3795
Burning Speed	1.14	in/min	ISO 3795

ELECTRICAL	Nominal value	Unit	Test method
Relative permittivity
100 Hz	4.2		IEC 62631-2-1
1 MHz	3.9		IEC 62631-2-1
Dissipation Factor
100 Hz	90	E-4	IEC 62631-2-1
1 MHz	150	E-4	IEC 62631-2-1
Volume Resistance
Dry	>1E13	ohm·m	IEC 62631-3-1
Wet Cond	1E13	ohm·m	IEC 62631-3-1
Surface Resistivity
Wet Cond	1E14	ohm	IEC 62631-3-2
Electric strength
Dry	889	kV/in	IEC 60243-1
Wet Cond	864	kV/in	IEC 60243-1
Compared Tracking Index
Dry	600		IEC 60112
Wet Cond	600		IEC 60112

Notes
1. Typical properties: these are not to be construed as specifications.
2. Annealed
3. First Heat
4. FMVSS 302
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.