| About |
|---|
| LNP™ STAT-KON™ JK800 compound is a 8% carbon fiber reinforced PC+ABS, electrostatic dissipative ECO conforming FR. Good hydrolytic stability. |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | PC+ABS |
| Material Status | Commercial: Active |
| Features | Hydrolysis stability,Halogen free,Flame Characteristics,ECO,V-0,5VB |
| Availabilitys | North America,Latin America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.25 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 260℃，2.16kg | 17 | g/10min | ASTM D1238 |
| Shrinkage rate | |||
| MD：3.2 mm | 0.10 to 0.20 | % | |
| TD：3.2 mm | 0.20 to 0.40 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| — | 7580 | MPa | ASTM D638 |
| — | 7500 | MPa | ISO 527-1-2 |
| Tensile strength | |||
| yield | 96.0 | MPa | ASTM D638 |
| yield | 95.0 | MPa | ISO 527-2/5 |
| fracture | 96.0 | MPa | ASTM D638 |
| fracture | 95.0 | MPa | ISO 527-2/5 |
| Tensile strain | |||
| yield | 1.9 | % | ASTM D638 |
| yield | 1.9 | % | ISO 527-2/5 |
| fracture | 1.9 | % | ASTM D638 |
| fracture | 1.9 | % | ISO 527-2/5 |
| Bending modulus | |||
| 50 mm span | 6200 | MPa | ASTM D790 |
| — | 6380 | MPa | ISO 178 |
| Bending stress | |||
| — | 145 | MPa | ISO 178 |
| Fracture, 50.0 mm span | 144 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 37 | J/m | ASTM D256 |
| 23℃ | 4.0 | kJ/m² | ISO 180-1A |
| Notched impact strength of cantilever beam | |||
| 23℃ | 350 | J/m | ASTM D4812 |
| 23℃ | 21 | kJ/m² | ISO 180/1U |
| Dart impact equipped with measuring instruments (23 ° C, Total Energy) | 82.0 | J | ASTM D3763 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed, 3.2 mm | 97.0 | ℃ | |
| 1.8 MPa, unannealed, 3.2 mm | 92.0 | ℃ | |
| 1.8 MPa, unannealed, 6.4 mm | 94.0 | ℃ | |
| Vicat Softening Temp | |||
| — | 111 | ℃ | ASTM D1525 7 |
| — | 101 | ℃ | ISO 306/B120 |
| Linear coefficient of thermal expansion | |||
| MD：-40~40℃ | 2.5E-5 | 1/℃ | ASTM E831 |
| MD：23~80℃ | 2.6E-5 | 1/℃ | ISO 11359-2 |
| TD：-40~40℃ | 6.5E-5 | 1/℃ | ASTM E831 |
| TD：23~80℃ | 7.4E-5 | 1/℃ | ISO 11359-2 |
| RTI Elec | 60.0 | °C | UL 746 |
| RTI Imp | 60.0 | °C | UL 746 |
| RTI | 60.0 | °C | UL 746 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | 1.0E+6 | ohms | ASTM D257 |
| Volume resistivity | 1.0E+3 | ohms·cm | ASTM D257 |
| Static Decay – 5000V to <50V | < 10 | msec | FTMS 101B |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 1.00 mm | V-0 | ||
| 1.50 mm | 5VB |
| Process Conditions | |||
|---|---|---|---|
| Injection | Nominal value | Unit | Test method |
| drying temperature | 75 to 80 | °C | |
| Drying time | 3.0 to 4.0 | hr | |
| Recommended maximum moisture content | 0.040 | % | |
| Suggested injection volume | 30 to 80 | % | |
| Temperature at the rear of the barrel | 210 to 255 | °C | |
| Temperature in the middle of the barrel | 215 to 260 | °C | |
| Front temperature of material barrel | 225 to 275 | °C | |
| Nozzle temperature | 230 to 275 | °C | |
| Processing (melt) temperature | 230 to 275 | °C | |
| Mold temperature | 50 to 70 | °C | |
| Back pressure | 0.300 to 0.700 | MPa | |
| Screw speed | 40 to 70 | rpm | |
| Exhaust hole depth | 0.038 to 0.076 | mm | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |