Keliren® CPE3610

About
Keliren® Chlorinated Polyethylene(CPE) thermoplastic resins are widely used as impact modifiers in PVC extrusion and injection molding applications, especially in products such as siding, widow profiles and pipe. The low dosage levels of Keliren® resins with rigid PVC resins can significantly improve impact strength and also act as a processing aid. In addition to offering attributes such as good chemical resistance, excellent low temperature properties, high filler level acceptance and excellent compatibility with a broad range of formulation ingredients, Keliren® resins offer excellent resistance to weathering in a properly formulated compound. Application: Impact Modifier for high-speed extrusion of PVC products Performance: Excellent processing flowability&&

About

Keliren® Chlorinated Polyethylene(CPE) thermoplastic resins are widely used as impact modifiers in PVC extrusion and injection molding applications, especially in products such as siding, widow profiles and pipe. The low dosage levels of Keliren® resins with rigid PVC resins can significantly improve impact strength and also act as a processing aid. In addition to offering attributes such as good chemical resistance, excellent low temperature properties, high filler level acceptance and excellent compatibility with a broad range of formulation ingredients, Keliren® resins offer excellent resistance to weathering in a properly formulated compound. Application: Impact Modifier for high-speed extrusion of PVC products Performance: Excellent processing flowability&&

Product Description
Supplier	Keli
Material Status	Commercial: Active
Features	High impact resistance,Good wear resistance,Solvent resistance,Weather resistance is good,High liquidity,Antifreeze
Availabilitys	Latin America,Europe,North America,Asia Pacific,Africa & Middle East

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Chlorine content	34.0 to 36.0	wt%	ISO 7725

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	< 60		ISO 7619

MECHANICAL	Nominal value	Unit	Test method
Tensile Strength
Broken BRK	> 8.50	MPa	ISO 37
Tensile Strain
Broken BRK	> 600	%	ISO 37

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.