| About |
|---|
| Product Description | |
|---|---|
| Supplier | Polyplastics |
| Generic | PBT/PC |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.48 | g/cm³ | ISO 1183 |
| Water Absorption | |||
| 23℃，24 h | 0.1 | % | ISO 62 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Strength | 149 | MPa | ISO 527-2 |
| Tensile Strain | |||
| Broken BRK | 2.6 | % | ISO 527 |
| Flexural Strength | 211 | MPa | ISO 178 |
| Flexural Modulus | 8840 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | 10.8 | kJ/m² | ISO 179/1eA |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature HDT | |||
| 1.80 MPa | 194 | ℃ | Internal Method |
| Coeff. of linear thermal expansion | |||
| 23℃-55℃，flow | 2 | ×10-5/℃ | Internal Method |
| 23℃-55℃，Transverse | 6 | ×10-5/℃ | Internal Method |
| Process Conditions | |||
|---|---|---|---|
| Injection Molding | Nominal value | Unit | Test method |
| Cylinder temperature | 260 | ℃ | |
| Mold Temperature | 60 | ℃ | |
| Injection pressure | 70 | MPa | |
| Injection speed | 24 | mm/s | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |