| About |
|---|
| Product Description | |
|---|---|
| Supplier | Audia |
| Material Status | Commercial: Active |
| Features | Excellent Processability,High liquidity,weathering resistance,Heat Resistance, Good |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Shore hardness | 38 | Shore A | ASTM D2240 |
| Tensile Strength | 2.0 | MPa | ASTM D412 |
| Tensile Stress | |||
| 100% Vertical Perpendicular | 0.8 | MPa | ASTM D412 |
| 300% Vertical Perpendicular | 1.3 | MPa | ASTM D412 |
| Elongation at Break | 400 | % | ASTM D412 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Specific Gravity | 0.95 | ASTM D792 |
| Process Conditions | |||
|---|---|---|---|
| Injection Molding | Nominal value | Unit | Test method |
| Drying Temperature | 40-60 | ℃ | |
| Drying Time | 1-2 | hr | |
| Barrel Zone 1 Temperature | 190-200 | ℃ | |
| Barrel Zone 2 Temperature | 200-230 | ℃ | |
| Barrel Zone 3 Temperature | 210-240 | ℃ | |
| Barrel Zone 4 Temperature | 210-240 | ℃ | |
| Melt Temperature | 260 | ℃ | |
| Mold Temperature | 20-60 | ℃ | |
| Injection pressure | 60-80% Max Pressure | ||
| Injection speed | 60-80% Max Speed | ||
| Hold Pressure | 40-60% Max Pressure | ||
| Screw Speed | 40-80 | rpm | |
| Back Pressure | 10-30% Max Pressure | ||
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |