WELLAMID Nylon 6600-PA66-HWV0CP

About

Product Description
Generic	PA66
Material Status	Commercial: Active

Technical Data
MECHANICAL	Nominal value	Unit	Test method
Tensile Stress
Yield yld	80	MPa	ISO 527
Tensile Strain
Yield yld	45	%	ISO 527
Broken BRK, dry dry	4.5	%	ISO 527
Broken BRK, wet Cond	50	%	ISO 527
Tensile Strength
Dry	20	MPa	ISO 527-2
Wet Cond	35	MPa	ISO 527-2
Tensile Modulus
Dry	3400	MPa	ISO 527
Wet Cond	1400	MPa	ISO 527
Flexural Modulus	3000	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Unnotch Impact strength
23℃	NB	kJ/m²	ISO 179
-40℃	–	kJ/m²	ISO 179
Charpy Notched Impact Strength
23 ℃, dry	7	kJ/m²	ISO 179
23 ℃, moist cond	25	kJ/m²	ISO 179

THERMAL	Nominal value	Unit	Test method
Melting temperature	262	℃
Hot deformation temperature HDT
A	75	℃	ISO 75-1/-2
B	215	℃	ISO 75-1/-2
Vicat softening point	230	℃	ISO 306
Coeff. of linear thermal expansion
23-80℃	0.85	×10-4/K	DIN 53752

ELECTRICAL	Nominal value	Unit	Test method
Relative permittivity
Dry	3.4	1 MHz	IEC 250
Wet Cond	5	1 MHz	IEC 250
Dissipation Factor
Dry	200	10-4	IEC 250
Wet Cond	3000	10-4	IEC 250
Electric strength
Dry	30	kV/mm	IEC 243-1
Wet Cond	30	kV/mm	IEC 243-1
Compared Tracking Index
Dry	600		IEC 112
Wet Cond	600		IEC 112
Volume Resistance
Dry	1E15	ohm·cm	IEC 93
Wet Cond	1E12	ohm·cm	IEC 93
Surface Resistivity
Dry	1E12	ohm	ISO 3915
Wet Cond	1E10	ohm	ISO 3915

PHYSICAL	Nominal value	Unit	Test method
Density	1.15	g/cm³	ISO 1183
Molding shrinkage	0.8-1.2	%
saturation value at	2-2.5	%	DIN 53495

FLAME CHARACTERISTICS	Nominal value	Test method
Flame Class Rating
0.8 mm, dry	V-0	UL 94
0.8 mm, moist cond	V-0	UL 94
1.6 mm, dry	V-0	UL 94
1.6 mm, moist cond	V-0	UL 94
3.2 mm, dry	V-0	UL 94
3.2 mm, wet cond	V-0	UL 94

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.