AFFINITY™ GA 1950

About
Ultra high clarity, low density, low viscosity polyolefin Excellent thermal stability Low Tg (Excellent low temperature properties) Excellent flexibility Non corrosive Excellent color and odor Excellent compatibility with a wide range of polymers Low crystallinity (can be heavily filled) Low density (better mileage) Excellent adhesion to diverse substrates when formulated Complies with: U.S. FDA FCN 424 Consult the regulations for complete details. AFFINITY* GA 1950 Polyolefin Plastomer (POP) is produced via INSITE* Technology from Dow Plastics. This product can be used in applications such as polymer modification (i.e. flow enhancement and property enhancement), masterbatch/additive carrier, and hot melt adhesives.&&

About

Ultra high clarity, low density, low viscosity polyolefin Excellent thermal stability Low Tg (Excellent low temperature properties) Excellent flexibility Non corrosive Excellent color and odor Excellent compatibility with a wide range of polymers Low crystallinity (can be heavily filled) Low density (better mileage) Excellent adhesion to diverse substrates when formulated Complies with: U.S. FDA FCN 424 Consult the regulations for complete details. AFFINITY* GA 1950 Polyolefin Plastomer (POP) is produced via INSITE* Technology from Dow Plastics. This product can be used in applications such as polymer modification (i.e. flow enhancement and property enhancement), masterbatch/additive carrier, and hot melt adhesives.&&

Product Description
Supplier	DOW
Generic	POP
Material Status	Commercial: Active
Availabilitys	North America,Latin America,Asia Pacific,Europe
Process Methods	Extrusion

Technical Data
MECHANICAL	Nominal value	Unit	Test method
tensile strength	1.76	MPa	ASTM D638
Tensile strain
fracture	190	%	ASTM D638

THERMAL	Nominal value	Unit	Test method
Glass transition temperature	-56.1	℃	Internal Method
Melting temperature
DSC	70.0	℃	Internal Method

PHYSICAL	Nominal value	Unit	Test method
Density	0.874	g/cm³	ASTM D792
Gardner color	2.00		ASTM D6290
Volatiles	< 0.15	%	ASTM D3030
Brookfield viscosity
177℃	17.0	Pa·s	ASTM D1084

Notes
1. Typical properties: these are not to be construed as specifications.
2. Modified for polyolefins. Change the temperature used to 100°C +/-3 and the amount of sample to 20 grams.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.