| About |
|---|
| AKROLOY® PARA ICF 40 black (6128) is a 40% carbon fibre reinforced polyarylamid with good flexural strength and tribological properties as well as reduced moisture. Components with high dimensional stability, independent from moisture content.&& |
| Product Description | |
|---|---|
| Generic | Paraformaldehyde |
| Material Status | Commercial: Active |
| Features | Good Dimensional Stability,Low moisture absorption |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.40 | g/cm³ | ISO 1183 |
| Shrinkage rate | |||
| TD | 0.30 to 0.35 | % | |
| MD | 0.25 to 0.30 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 39000 | MPa | ISO 527-1-2 |
| tensile strength | |||
| fracture | 280 | MPa | ISO 527-2/5 |
| Tensile strain | |||
| fracture | 1.0 | % | ISO 527-2/5 |
| Bending modulus | 37000 | MPa | ISO 178 |
| bending strength | 420 | MPa | ISO 178 |
| Fracture bending strain | 1.2 | % | ISO 178 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 235 | ℃ | DIN EN 11357-1 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Ash Content | 40 | % | ISO 1172 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.079 in/min |
| 3. 2 mm/min |
| 4. 10°C/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |