| About |
|---|
| Product Description | |
|---|---|
| Supplier | DSM |
| Material Status | Commercial: Active |
| Features | Flame Characteristics |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Molding shrinkage | |||
| Parallel | 0.21 | % | ISO 294-4 |
| Normal | 0.65 | % | ISO 294-4 |
| Density | 1550 | kg/m³ | ISO 1183 |
| Water Absorption | 0.05 | % | ISO 62 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Modulus | |||
| 12000 | MPa | ISO 527 | |
| 120℃ | 5000 | MPa | ISO 527 |
| 160℃ | 3500 | MPa | ISO 527 |
| 200℃ | 2950 | MPa | ISO 527 |
| Tensile Strength | |||
| 170 | MPa | ISO 527-2 | |
| 120℃ | 75 | MPa | ISO 527-2 |
| 160℃ | 55 | MPa | ISO 527-2 |
| 200℃ | 45 | MPa | ISO 527-2 |
| Tensile Strain | |||
| 2 | % | ISO 527 | |
| 120℃ | 4.6 | % | ISO 527 |
| 160℃ | 5.3 | % | ISO 527 |
| 200℃ | 5-4 | % | ISO 527 |
| Flexural Modulus | |||
| 10000 | MPa | ISO 178 | |
| 120℃ | 4300 | MPa | ISO 178 |
| 160℃ | 3300 | MPa | ISO 178 |
| 200℃ | 2900 | MPa | ISO 178 |
| Flexural Strength | 240 | MPa | ISO 178 |
| Rockwell hardness | |||
| R | 120 | ISO 2039-2 | |
| M | 100 | ISO 2039-2 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | |||
| 23℃ | 58 | kJ/m² | ISO 179/1eU |
| -30℃ | 56 | kJ/m² | ISO 179/1eU |
| Charpy Notched Impact Strength | |||
| 23℃ | 9 | kJ/m² | ISO 179/1eA |
| -30℃ | 8 | kJ/m² | ISO 179/1eA |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 280 | ℃ | ISO 11357-3 |
| Hot deformation temperature HDT | |||
| 1.80 MPa | 265 | ℃ | ISO 75-1/-2 |
| Coeff. of linear thermal expansion | |||
| parallel | 0.18 | ×10-4/℃ | ISO 11359-2 |
| normal | 0.5 | ×10-4/℃ | ISO 11359-2 |
| parallel, above Tg | 0.18 | ×10-4/℃ | ISO 11359-2 |
| normal, above Tg | 1.2 | ×10-4/℃ | ISO 11359-2 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame Class Rating | |||
| 1.5 mm | V-0 | calss | IEC 60695-11-10 |
| 0.8 mm | V-0 | calss | IEC 60695-11-10 |
| ELECTRICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume Resistance | >1E13 | ohm·m | IEC 60093 |
| Electric strength | 34 | kV/mm | IEC 60243-1 |
| Compared Tracking Index | 175 | V | IEC 60112 |
| Dissipation Factor | 45 | E-4 | IEC 60250 |
| Relative permittivity | 3.8 | – | IEC 60250 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |