| About |
|---|
| YUNGSOX® PP 1024是一种聚丙烯均聚物(PP Homopoly)材料,。 该产品在亚太地区有供货,。 YUNGSOX® PP 1024的主要特性有: 均聚物 耐热 透明度 高刚度 典型应用领域包括: 瓶子 薄板 食品接触应用&& |
| Product Description | |
|---|---|
| Supplier | fpc-tw |
| Generic | PP homopolymerization |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good Clarity,High Heat Resistance,Homopolymer |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.910 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 1.8 | g/10min | ISO 1133 |
| Shrinkage rate | 1.3 to 1.7 | % | Internal Method |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 78 | J/m | ISO 180 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 122 | ℃ | ISO 75-2/A |
| Vicat Softening Temp | 155 | ℃ | ISO 306 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 110 | ISO 2039-2 | |
| tensile strength | |||
| yield | 39.2 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | 200 | % | ISO 527-2 |
| Bending modulus | 1570 | MPa | ISO 178 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |