| About |
|---|
| 此牌号为中石化产品，以下参数是茂名石化K8003的数据，仅供参考，不对广州K8003的数据误差作任何保证。K8003系采用INEOS的INNOVENE气相工艺生产的以乙烯为共聚单体的抗冲聚丙烯树脂，具有超高的抗冲击强度 |
| Product Description | |
|---|---|
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Features | High impact resistance |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | 2.5 | g/10min | GB/T 3682 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | 80 | R 级 | GB/T 3398.2 |
| tensile strength | |||
| yield | 24.2 | MPa | GB/T 1040.2 |
| Bending modulus | 939 | MPa | GB/T 9341 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 38.4 | kJ/m² | GB/T 1043.1 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | 67.1 | ℃ | GB/T 1634.2 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |