| About |
|---|
| EMERGE™ PC 8600 是一种半透明、阻燃的聚碳酸酯树脂。此种材料不含溴、氯或者磷酸盐类添加剂，符合国际环保要求。该聚碳酸酯树脂的流动性能佳，适宜于计算机、电子设备、电器和信息技术设备的注塑加工。 应用领域： 信息技术设备 电子电器产品 电池充电器和稳压器&& |
| Product Description | |
|---|---|
| Supplier | Trinseo |
| Generic | Polycarbonate |
| Material Status | Commercial: Active |
| Features | Good liquidity,Halogen free,Flame Characteristics,V-0 |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.20 | g/cm³ | ASTM D792 , ISO 1183/B |
| Melt Flow Rate | |||
| 300℃，1.20kg | 10 | g/10min | ASTM D1238，ISO 1133 |
| Shrinkage rate | |||
| MD | 0.50 to 0.70 | % | ASTM D955 |
| MD | 0.50 to 0.70 | % | ISO 294-4 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23 ℃, 3.2mm, injection molding | 750 | J/m | ASTM D256 |
| 23 ℃, injection molding | 10 | kJ/m² | ISO 180-A |
| Dart impact equipped with measuring instruments | |||
| 23 ℃, 3.20 mm, total energy | 58.8 | J | ASTM D3763 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 139 | ℃ | ASTM D648，ISO 75-2/B |
| 1.8 MPa, unannealed | 127 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed | 125 | ℃ | ISO 75-2/A |
| Vicat Softening Temp | |||
| — | 149 | ℃ | ASTM D1525 6 |
| — | 150 | ℃ | ISO 306/A120 |
| B50 | 144 | ℃ | ISO 306 |
| Ball pressure temperature | > 125 | ℃ | IEC 60335-1 |
| Linear coefficient of thermal expansion | |||
| MD：-22~85℃ | 6.5E-5 | 1/℃ | ASTM D696 |
| Relative temperature index | 125 | ℃ | UL 746 |
| Electrical performance | 125 | ℃ | UL 746 |
| Impact mechanical performance | 125 | ℃ | UL 746 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| 1.60 mm | V-0 | UL 94 | |
| Igniting temperature of the hot wire | |||
| 2 mm | 960 | ℃ | IEC 60695-2-13 |
| Extreme oxygen index | 35 | % | ASTM D2863，ISO 4589-2 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-grade, 3.20 mm | 123 | ASTM D785 | |
| R-grade, 4.00 mm | 123 | ISO 2039-2 | |
| Tensile modulus | |||
| 3.20 mm, injection molded | 2210 | MPa | ASTM D638 |
| 4 mm, injection molded | 2200 | MPa | ISO 527-2/50 |
| tensile strength | |||
| Yield, 3.20 mm, injection molding | 60.0 | MPa | ASTM D638 |
| Yield, 4 mm, injection molding | 60.0 | MPa | ISO 527-2/50 |
| Fracture, 3.20 mm, injection molded | 57.9 | MPa | ASTM D638 |
| Fracture, 4 mm, injection molded | 58.0 | MPa | ISO 527-2/50 |
| Tensile strain | |||
| Yield, 3.20 mm, injection molding | 6.2 | % | ASTM D638 |
| Yield, 4 mm, injection molding | 6.0 | % | ISO 527-2/50 |
| Fracture, 3.20 mm, injection molded | 110 | % | ASTM D638 |
| Fracture, 4 mm, injection molded | 110 | % | ISO 527-2/50 |
| Bending modulus | |||
| 3.20 mm, injection molded | 2400 | MPa | ASTM D790 |
| 4 mm, injection molded | 2400 | MPa | ISO 178 |
| bending strength | |||
| 3.20 mm, injection molded | 93.8 | MPa | ASTM D790 |
| 4 mm, injection molded | 94.0 | MPa | ISO 178 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 121 | °C | |
| Drying time | 3.0 to 4.0 | hr | |
| Processing (melt) temperature | 271 to 288 | °C | |
| Mold temperature | 66 to 99 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |