INEOS EMAA M28N430

About
Ethylene-MethAcylic-Acid-Copolymer (EMAA) for extrusion coating. Benefits & Features M28N430 is an additive free ethylene-methacrylic-acid-copolymer (EMMA) with a high MAA content. Its special polymer structure gives the following properties: Improved adhesion properties to standard LDPE/mLLDPE or other polar substrates, especially with aluminium foil and metallised film at high line speeds or low coating weights Good processability in coextrusion with comparable neck in and draw down to LDPE Exhibits very good sealing properties enhanced by the presence of the comonomer Good organoleptical properties Low fumes during processing an high purity Applications M28N430 is a speciality extrusion coating resin with improved adhesion characteristics. Main extrusion coating application for aluminium foil containing laminates in liquid food packaging and flexible packaging.&&

About

Ethylene-MethAcylic-Acid-Copolymer (EMAA) for extrusion coating. Benefits & Features M28N430 is an additive free ethylene-methacrylic-acid-copolymer (EMMA) with a high MAA content. Its special polymer structure gives the following properties: Improved adhesion properties to standard LDPE/mLLDPE or other polar substrates, especially with aluminium foil and metallised film at high line speeds or low coating weights Good processability in coextrusion with comparable neck in and draw down to LDPE Exhibits very good sealing properties enhanced by the presence of the comonomer Good organoleptical properties Low fumes during processing an high purity Applications M28N430 is a speciality extrusion coating resin with improved adhesion characteristics. Main extrusion coating application for aluminium foil containing laminates in liquid food packaging and flexible packaging.&&

Product Description
Supplier	INEOS
Generic	EMA
Material Status	Commercial: Active
Features	Excellent Processability,High purity,Good heat sealing,Low odor,Good bond,Good sensory characteristics.,Copolymer
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
190℃，2.16kg	8.0	g/10min	ISO 1133
Methacrylic Acid Content	8.3	%	Internal Method

THERMAL	Nominal value	Unit	Test method
Melting temperature
DSC	101	℃	Internal Method

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	260 to 290	°C

Notes
1. Typical properties: these are not to be construed as specifications.
2. 10°C/min
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.