| About |
|---|
| Product Description | |
|---|---|
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Excellent Processability,Corrosion Resistant,Rigid-tough balance,High ESCR |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Tensile strain | |||
| yield | 8 | % | ASTM D638，ISO 527 |
| fracture | 500 | % | ASTM D638，ISO 527 |
| bending strength | 20 | MPa | ASTM D790，ISO 178 |
| Bending modulus | 1100 | MPa | ASTM D790/ISO 178 |
| Rockwell hardness | 60 | ASTM D785 | |
| tensile strength | 28 | MPa | ASTM D638，ISO 527 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Water absorption rate | |||
| 23℃，24hr | 0.03 | % | ASTM D570，ISO 62 |
| Density | 0.954 | g/cm³ | ASTM D792/ISO 1183 |
| Melt Flow Rate | |||
| 200℃，5.0kg | 0.33 | g/10min | ASTM D1238，ISO 1133 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| melting point | 134 | ℃ | – |
| Vicat Softening Temp | 128 | ℃ | ASTM D1525/ISO R306 |
| Thermal deformation temperature | |||
| Unannealed | 70 | ℃ | ASTM D648/ISO 75 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 160 | J/m | ASTM D256/ISO 179 |
| Impact strength of cantilever beam notch | |||
| 23℃，6.4mm | 120 | J/m | ASTM D256，ISO 179 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |