Marlex® HHM 5502BN

About
Marlex® HHM 5502BN This high molecular weight, ethylene-hexene copolymer is tailored for lightweight blow molded containers that require: Excellent stiffness Exceptional processability Durability Recyclability Typical blow molded applications for HHM 5502BN include: Ice chests and coolers Household and industrial chemical containers Food packaging Pharmaceuticals This resin meets these specifications: ASTM D4976 – PE 235 FDA 21 CFR 177.1520(c) 3.2a, use conditions B through H per Table 2 off 21 CFR 176.170(c) Listed in the Drug Master File&&Marlex® HHM 5502BN This high molecular weight hexene copolymer is tailored for light blow moulded containers that require: Excellent stiffness Exceptional processability Typical blow moulded applications for HHM 5502BN include: Household chemicals Industrial chemicals Pharmaceuticals Toolboxes Furniture&&

About

Marlex® HHM 5502BN This high molecular weight, ethylene-hexene copolymer is tailored for lightweight blow molded containers that require: Excellent stiffness Exceptional processability Durability Recyclability Typical blow molded applications for HHM 5502BN include: Ice chests and coolers Household and industrial chemical containers Food packaging Pharmaceuticals This resin meets these specifications: ASTM D4976 – PE 235 FDA 21 CFR 177.1520(c) 3.2a, use conditions B through H per Table 2 off 21 CFR 176.170(c) Listed in the Drug Master File&&Marlex® HHM 5502BN This high molecular weight hexene copolymer is tailored for light blow moulded containers that require: Excellent stiffness Exceptional processability Typical blow moulded applications for HHM 5502BN include: Household chemicals Industrial chemicals Pharmaceuticals Toolboxes Furniture&&

Product Description
Generic	HDPE
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Renewable resources,Food contact compliance,High molecular weight,Copolymer,Durability,Hexene copolymers
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.955	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	0.35	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
100% non-ionic detergent, molded, F50	35.0	hr	ASTM D1693B

MECHANICAL	Nominal value	Unit	Test method
tensile strength
Yield, molding	27.0	MPa	ASTM D638
Tensile strain
Fracture, molded	600	%	ASTM D638
Bending modulus
Tangent, molded	1370	MPa	ASTM D790

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	< -75.0	℃	ASTM D746

Notes
1. use conditions B through H
2. Typical properties: these are not to be construed as specifications.
3. Type IV, 2.0 in/min
4. 0.50 in/min
5. 16:1 span:depth
6. Type I specimen
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.